Learning Center

Whether you’re looking for solutions to specific challenges or wanting to deepen your overall knowledge of secondary packaging, our Learning Center is designed to give you the resources to make confident decisions about your secondary packaging systems.

Filter by Category

Filter by Topic

Filter by Type

Filter Resources

Case and tray packed with aluminum cans on a gray background

Comparisons, Secondary Packaging 101

What’s the Difference Between a Case Packer and a Tray Packer?

Learn the essential difference between case and tray packers and when their format works best for your application.

Problems / Challenges

Factory Tested Sizes: Why Cheaper FAT Scope Often Costs More Later

Understand the value differences between a thorough FAT scope and a shallow FAT scope — and which investment costs more in the long term.

Delays Factory Acceptance Test (FAT) Pricing Startup

Problems / Challenges

Commissioning Governance for Packaging Equipment: How to Run Startup Without Chaos

Get a clear, practical guide for CPG manufacturers commissioning new packaging equipment.

Commissioning Overall Equipment Effectiveness (OEE) Startup

Operator reach into machine to adjust magazine infeed

Problems / Challenges

The Overlooked Link Between Packaging Materials, Machine Specs, and Line Performance

Learn how packaging material variability impacts line performance, how frequently missing specs affect OEE, maintenance and safety, and what alignments prevent recurring losses.

Packaging Materials Procurement Systems Alignment

Problems / Challenges

The Hidden Ergonomic Problem with Mechanism-Heavy Automation

Learn why mechanism-heavy automation often creates frequent operator intervention and how robots can (and can’t) simplify automation that improves operator safety and health.

Ergonomics Robotic Solutions Safety

Bottles of juice being metered on a conveyor belt

Comparisons, Secondary Packaging 101

The 4 Types of Tamp & Load Infeeds Explained: Speeds, Costs, and Best-Fit Applications

Learn what tamp and load infeeds actually do and which configuration makes the most sense for your product and your budget.

Infeed

Three technicians doing hands-on training on a piece of equipment

Problems / Challenges

Best-in-Class Training for Secondary Packaging Equipment: What Should You Expect?

Break down the five elements that separate basic machine instruction from performance-driven training programs.

Overall Equipment Effectiveness (OEE)

Secondary Packaging 101

Raise Your Expectations: What a Great Packaging Automation Partner Looks Like

Learn what a great packaging automation partner should look like — before and after the purchase order — so you can move forward with clarity and confidence.

Partner

Product being discharged from Shrink tunnel

Cost & Price

How Much Does a Shrink Wrap System Cost? Budgetary Pricing & Key Factors That Impact Price

Learn the budgetary price ranges you can expect, along with the specific factors that drive those prices.

Budgetary Price Shrink Wrap System

1 2 3 4 5 6 7

Operator working on a machine's HMI, with a large checklist icon overlay

Secondary Packaging 101

What Is a Machinery Risk Assessment and Who’s Responsible for It?

Machinery risk assessment is a multi-stage process where OEMs, integrators, and end users each assess different hazards. Understanding who is responsible for what, prevents safety gaps.

Original Equipment Manufacturer (OEM) Risks Safety System Integrator (SI)

Spray bottles upright on conveyor and spray bottles upright inside case

Secondary Packaging 101

What Is Product Orientation in Secondary Packaging and Why Does It Matter?

Understand what product orientation is, how it impacts your equipment, and what decisions need to be considered when choosing your packaging equipment.

Across Machine (AM) Direction of Travel (DOT) Display-Ready Loading Product Orientation

Bags of croutons on conveyor, arrow pointing down conveyor labeled DOT and arrow pointing across conveyor labeled AM

Secondary Packaging 101

What Is ‘Direction of Travel’ (DOT) and ‘Across Machine’ (AM) and Why Do They Matter?

Learn the definitions of DOT and AM, how they affect your product and equipment, and what questions to ask before you spec a new machine.

Across Machine (AM) Direction of Travel (DOT)

Secondary Packaging 101

What Is an SAT in Packaging Equipment?

Learn how Site Acceptance Testing differs from FAT, what SAT is meant to verify onsite, and why real production conditions can change the outcome.

Site Acceptance Test (SAT)

Men Working on Tablet by Packaging Machine

Secondary Packaging 101

Why Startup Support Still Matters After FAT and SAT

Learn why startup support still matters after FAT and SAT and how it helps stabilize production, build team confidence, and improve line performance.

Commissioning Field Service Support

Secondary Packaging 101

What FAT Should (and Should Not) Prove Before Your Machine Ships

Learn what a strong Factory Acceptance Test should validate before shipment, what FAT cannot prove, and how to use FAT to reduce downstream surprises.

Factory Acceptance Test (FAT)

1 2 3 4 5 6 … 10

HORIZONTAL LOAD

TOP LOAD

SHRINK WRAPPERS

SHRINK PACKERS

MULTIWRAPPERS

CARTONERS

SLEEVERS

MULTIPACKERS

Learning Center

Whether you’re looking for solutions to specific challenges or wanting to deepen your overall knowledge of secondary packaging, our Learning Center is designed to give you the resources to make confident decisions about your secondary packaging systems.

Filter by Category

Filter by Topic

Filter by Type

What’s the Difference Between a Case Packer and a Tray Packer?

Factory Tested Sizes: Why Cheaper FAT Scope Often Costs More Later

Commissioning Governance for Packaging Equipment: How to Run Startup Without Chaos

The Overlooked Link Between Packaging Materials, Machine Specs, and Line Performance

The Hidden Ergonomic Problem with Mechanism-Heavy Automation

The 4 Types of Tamp & Load Infeeds Explained: Speeds, Costs, and Best-Fit Applications

Best-in-Class Training for Secondary Packaging Equipment: What Should You Expect?

Raise Your Expectations: What a Great Packaging Automation Partner Looks Like

How Much Does a Shrink Wrap System Cost? Budgetary Pricing & Key Factors That Impact Price

What Is a Machinery Risk Assessment and Who’s Responsible for It?

What Is Product Orientation in Secondary Packaging and Why Does It Matter?

What Is ‘Direction of Travel’ (DOT) and ‘Across Machine’ (AM) and Why Do They Matter?

What Is an SAT in Packaging Equipment?

Why Startup Support Still Matters After FAT and SAT

What FAT Should (and Should Not) Prove Before Your Machine Ships

Solutions

Support

About Us

Resources

Filter by Category

Filter by Topic

Filter by Type